Report an Error

Movespeed SSD 4 TB (YMTC CDT2A X3-9060)

4 TB
Capacity
MAP1602A
Controller
TLC
Flash
PCIe 4.0 x4
Interface
M.2 2280
Form Factor

Multiple hardware versions found.

Performance could vary due to unannounced flash/controller changes.

SSD Controller
Controller
NAND Die
NAND Die
The Movespeed SSD is a solid-state drive in the M.2 2280 form factor, launched in 2023. It is available in capacities ranging from 1 TB to 4 TB. This page reports specifications for the 4 TB variant. With the rest of the system, the Movespeed SSD interfaces using a PCI-Express 4.0 x4 connection. The SSD controller is the MAP1602A Falcon Lite from MaxioTech, a DRAM cache is not available. Movespeed has installed 128-layer TLC NAND flash on the SSD, the flash chips are made by YMTC. Please note that this SSD is sold in multiple variants with different NAND flash or controller, which could affect performance, the "Notes" section at the end of this page has more info. To improve write speeds, a pseudo-SLC cache is used, so bursts of incoming writes are processed more quickly. Thanks to support for the fast PCI-Express 4.0 interface, performance is excellent. The SSD is rated for sequential read speeds of up to 7,450 MB/s and 6,500 MB/s write.
At its launch, the SSD was priced at 226 USD. The warranty length is set to three years, which is above average, but shorter than the five years offered by many other vendors. Movespeed guarantees an endurance rating of 2400 TBW, a good value.

Solid-State-Drive

Capacity: 4 TB (4000 GB)
Variants: 1 TB 2 TB 4 TB
Hardware Versions:
Overprovisioning: 370.7 GB / 10.0 %
Production: Active
Released: 2023
Price at Launch: 226 USD
Part Number: YSSDHB-4TN7000
Market: Consumer

Physical

Form Factor: M.2 2280 (Single-Sided)
Interface: PCIe 4.0 x4
Protocol: NVMe 1.4
Power Draw: Unknown

Controller

Manufacturer: MaxioTech
Name: MAP1602A Falcon Lite
Architecture: ARM 32-bit Cortex-R5
Core Count: Quad-Core
Foundry: TSMC
Process: 12 nm
Flash Channels: 4 @ 2,400 MT/s
Chip Enables: 4
Controller Features: HMB (enabled)

NAND Flash

Manufacturer: YMTC
Name: Xtacking 2.0 (CDT2A)
Type: TLC
Technology: 128-layer
Speed: 2400 MT/s
Capacity: 4 chips @ 8 Tbit
ONFI: 4.0
Topology: Charge Trap
Die Size: 60 mm²
(8.5 Gbit/mm²)
Dies per Chip: 16 dies @ 512 Gbit
Planes per Die: 4
Decks per Die: 2
Word Lines: 141 per NAND String
90.8% Vertical Efficiency
Read Time (tR): 46 µs
Program Time (tProg): 620 µs
Block Erase Time (tBERS): 9.0 ms
Die Read Speed: 1391 MB/s
Die Write Speed: 103 MB/s
Endurance:
(up to)
3000 P/E Cycles
(60000 in SLC Mode)
Page Size: 16 KB
Plane Size: 2304 Blocks

DRAM Cache

Type: None
Host-Memory-Buffer (HMB): 40 MB

Performance

Sequential Read: 7,450 MB/s
Sequential Write: 6,500 MB/s
Random Read: Unknown
Random Write: Unknown
Endurance: 2400 TBW
Warranty: 3 Years
Drive Writes Per Day (DWPD): 0.5
SLC Write Cache: Yes

Features

TRIM: Yes
SMART: Yes
Power Loss Protection: No
Encryption:
  • Unknown
RGB Lighting: No
PS5 Compatible: Yes

Notes

Controller:

This controller features multiples variants:
F1C - Uses NVMe 1.4
F2C - Uses NVMe 1.4
F3C - Uses NVMe 2.0
F3C U - For 4TB SSDs and uses NVMe 2.0

NAND Die:

Array Eficiency of over 92%
Xtacking 3.0 introduces back side source connect (BSSC) for memory cell wafer, which leads to simpler process and lower cost
This layout has a 2x 2 Plane layout
It achieves 26µs in read latencies in pSLC Mode, and also 180 µs in tPROG in pSLC Mode.

Jun 1st, 2024 18:38 EDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts